![]() ![]() Turn the unit off, reposition the laser within the self-leveling range and turn it on again. If the laser is positioned beyond its a self-leveling range of ☘%, the laser beam, and manual and leveling indicators flash simultaneously. The „set and forget“ function turns on the laser beam while scan size, beam position, and rotation speed are adjusted. The laser is level when the leveling indicator 4 is no longer flashing (once every second).įor the first five minutes after the laser self-levels, the LED 4 lights solid then flashes every four seconds to let you know the laser is still level.Īfter turning on the laser and after self-leveling, the laser starts in the last chosen mode. The LEDs (2, 4, and 5) are turned on for 2 seconds. Note: The laser always powers up in the automatic self-leveling mode. ![]() Press the power button 1 to turn on the laser. The laser recognizes automatically whether it is used horizontally or vertically when switched on. Position the laser horizontally or vertically (tripod mount and rubber feet downward!) on a stable platform, wall mount or tripod at the desired elevation. Push down on the battery door until the latch “clicks” into position. Insert batteries into the housing so that the negative poles are on the bigger battery spiral spring. Open the battery door using your fingers, a coin or a screwdriver. If initial service is required, which results in the removal of the outer protective cover, removal must only be performed by factory-trained personnel.Ĭaution: Use of other than the described user and calibration tools or other procedures may result in exposure to hazardous laser light.Ĭaution: Using different than described at the HV101 user guide, may result in unsafe operation.Always operate the unit in a way that prevents the beam from getting into people‘s eyes.Never look into the laser beam or direct it to the eyes of other people.Do not remove warning labels from the unit.Use of this product by people other than those trained on this product may result in exposure to hazardous laser light.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |